Hiring an SMF4 Chief Risk Officer: A Guide for UK Regulated Firms
SMF4 is the Senior Management Function that attaches personal regulatory accountability to the Chief Risk Officer of a regulated firm. At banks, building societies, PRA-designated investment firms and most insurers it is a PRA-designated function; among FCA solo-regulated firms it applies only to Enhanced firms. It is a different role from a corporate CRO appointment — the candidate must be approved by the regulator before they take up the role, the Statement of Responsibility is a regulatory document with weight, and the personal accountability under the regime affects who is genuinely available, what they should be paid, and what the firm needs to do to make the role attractive to the strongest candidates. SMF4 is also one of the most operationally consequential SMF appointments: the CRO is the senior individual responsible for the firm’s risk management framework, the second line of defence (where the firm operates a three-lines model), and the relationship between risk and the Board’s Risk Committee.
This guide is written for CEOs, chairs of Risk Committees, and Boards working through the appointment of a CRO into a regulated firm. It sets out what an SMF4 appointment actually involves: which firms need one, how the role differs from a corporate CRO, how it sits within the three lines of defence, what the Statement of Responsibility looks like, how the approval process operates, how to think about the candidate pool, how interim cover works, and what compensation and structure look like at the senior level. It draws on the work we run across asset management, wealth management, insurance, brokerage, banking and consumer credit firms — and on the FCA’s published guidance on senior management functions for solo-regulated firms. For the broader SMF picture, see our SMF Roles guide; for permanent, interim and fractional CRO searches, see our Chief Risk Officer recruitment service.
Short answer: what is SMF4?
SMF4 is the Chief Risk function under the Senior Managers and Certification Regime (SM&CR): the person with overall responsibility for managing the firm’s risk controls, including setting and managing its risk exposures and reporting to the Board on risk. It applies to dual-regulated firms (banks, building societies, PRA-designated investment firms and most insurers) and to FCA Enhanced firms. Core and Limited Scope solo-regulated firms have no SMF4.
For a shorter summary of the function, see SMF Capital’s guide to SMF4, the chief risk officer function.
The holder must be approved before starting — by the PRA with FCA consent at dual-regulated firms, or by the FCA at Enhanced firms. The October 2026 Phase 2 reform proposals (FCA CP26/37 and PRA CP14/26) keep SMF4 as a pre-approved role.
What SMF4 covers
SMF4 is the Chief Risk Officer function under the Senior Managers and Certification Regime. It applies to the senior individual responsible for the firm’s risk function — typically the CRO reporting to the CEO, with a direct line to the Board or the Chair of the Risk Committee. The PRA Rulebook defines the Chief Risk function as the function of having responsibility for overall management of the risk controls of a firm, including setting and managing its risk exposures and reporting directly to the governing body on risk management arrangements. Like other senior management functions, SMF4 must be held by an approved individual at all times where the function exists at the firm; any change in the SMF4 holder triggers a regulatory notification and approval process.
The substantive scope of SMF4 covers what a corporate CRO would recognise — the firm’s risk management framework, the risk appetite framework that defines what the firm will and will not do, the firm’s stress testing and scenario planning, the operation of the second line of defence, and the senior-level relationship with the Board on risk matters. The regulatory dimension is layered through every part of it: the SMF4 holder is personally accountable for the way the firm’s risk function operates, and the regulators can hold them personally accountable when something goes wrong in their area of responsibility.
One specific point worth being explicit about. SMF4 does not apply to every regulated firm. Under the FCA Handbook (SUP 10C Annex 1), SMF4 appears only in the table of functions for Enhanced firms; it is not a function for Core or Limited Scope firms at all. At those firms, risk responsibility usually sits with the SMF1 (CEO), an SMF3 Executive Director or, in practice, alongside the SMF16 Compliance Oversight holder — and a person may carry the title “Chief Risk Officer” without holding an SMF. For dual-regulated firms, the Chief Risk function is a PRA-designated function and applies to banks, building societies and PRA-designated investment firms, and to Solvency II insurers and large non-Solvency II insurers. If you are unsure whether your firm has SMF4 in scope, check your SM&CR category and your Management Responsibilities Map before you write the brief.
Which firms need an SMF4?
The question of whether the role is an SMF at all is the first thing to settle, because it changes the timeline, the candidate pool and the governance work. The table below sets out the position as at November 2026.
| Firm type | SMF4 required? | Who approves | Practical note |
|---|---|---|---|
| Core firm (most solo-regulated firms) | No | Not applicable | Risk oversight sits with SMF1, SMF3 or the governing body; a “CRO” or head of risk can be appointed without SMF approval. |
| Limited Scope firm | No | Not applicable | Fewer SMFs overall; risk responsibility typically with the senior manager running the business. |
| Enhanced firm (largest solo-regulated firms) | Yes, where a person has overall responsibility for risk controls | FCA | Usually works with an SMF10 Risk Committee Chair. Phase 2 proposes higher Enhanced thresholds, so fewer firms may be in scope in future. |
| Banks, building societies, PRA-designated investment firms | Yes | PRA, with FCA consent | PRA-designated function. ICAAP, ILAAP, recovery planning and internal stress testing are central to the role. |
| Solvency II and large non-Solvency II insurers | Yes | PRA, with FCA consent | Owns the risk management function and the ORSA process, working alongside the Chief Actuary (SMF20). |
| Small insurers and credit unions | Generally no separate SMF4 | PRA | Small insurers use the SMF25 Small Insurer function; the PRA’s executive SMF chapter does not apply to credit unions. |
| Payment and e-money institutions | No | Not applicable | Outside SM&CR altogether, although the FCA still assesses the people running them. |
Two consequences follow. First, a Core firm that advertises for a “CRO” is hiring a senior risk leader, not an SMF4 — the appointment does not need regulatory approval, though the person will usually sit close to the SMF16 and SMF17 holders and the CEO. Second, a growing firm that is approaching the Enhanced thresholds (or a fintech applying for a banking licence) needs to plan its SMF4 appointment as part of that transition, not after it. Our guide to CRO recruitment at challenger banks and dual-regulated firms covers the build-out case in more detail.
SMF4 and the SM&CR reforms: what has changed and what is proposed
The regime around SMF4 is moving. Two sets of changes matter to anyone hiring a CRO in late 2026.
Phase 1 (in force). The FCA’s PS26/6, with matching PRA changes, took effect on 24 April 2026, with some elements following on 10 July 2026. The changes most relevant to an SMF4 appointment are:
- The 12-week rule now turns on submission, not approval. A firm covering an unforeseen or temporary SMF vacancy must submit an application within the 12-week window, and the person covering can stay in post until the regulator decides it. Covering individuals are subject to the Senior Manager Conduct Rules.
- Regulatory references are faster. The expected turnaround for a reference has fallen from six weeks to four.
- Criminal records checks last longer. A check remains usable for six months rather than three, and is no longer needed for internal or intragroup moves.
- SoR and MRM filings can be batched. Updated Statements of Responsibilities and Management Responsibilities Maps can be submitted up to every six months, although internal records must still be kept current.
Phase 2 (proposed). In October 2026 the FCA published CP26/37 and the PRA published CP14/26. Both close on 22 January 2027. The headline proposals are to move a number of SMFs from pre-approval to notification, to remove the Certification Regime, to raise the thresholds for Enhanced firms, to delete most FCA prescribed responsibilities and to stop routine submission of SoRs and MRMs. For CRO hiring, the key point is that SMF4 stays pre-approved in the PRA’s proposals and in the FCA’s list of approval functions for Enhanced firms. By contrast, the Risk Committee Chair (SMF10) and the Head of Internal Audit (SMF5) are proposed to become notified roles. The PRA expects implementation in the second half of 2027, subject to legislation. Until final rules are published, firms should run SMF4 appointments under the current rules and treat the Phase 2 changes as direction of travel.
Three lines of defence: where the SMF4 sits
Almost every regulated firm of meaningful scale operates a “three lines of defence” model for risk management, and understanding which line the SMF4 sits in is the starting point for the search. The three-lines model is the framework most boards and regulators use to think about how risk is managed across the firm.
The first line is the business — the people and functions that take risk on behalf of the firm in pursuit of its commercial objectives. Trading desks, portfolio managers, lending teams, underwriters, sales functions all sit in the first line. They are the people closest to the risk and the people who manage it day-to-day in their decisions.
The second line is the independent risk function and the compliance function. They set the framework within which the first line operates, monitor first-line activity against that framework, and provide independent challenge to the business’s risk decisions. The CRO leads the second line risk function — and SMF4 typically sits firmly in the second line.
The third line is internal audit, which provides independent assurance to the Board and the Audit Committee that both the first and second lines are working effectively. Internal audit reports to the Audit Committee Chair (often through SMF5 Head of Internal Audit) and is structurally independent of both the business and the second-line risk function.
For SMF4 hiring, this matters in two ways. First, the candidate’s prior experience needs to be in the second line. Strong candidates may have moved between first and second line earlier in their careers — a CRO who once ran a trading desk often has real value in their understanding of where risk actually arises — but their most recent senior experience should be in the second line. A candidate moving directly from a senior first-line role into SMF4 will face a more substantive regulatory assessment on whether they can operate with appropriate independence from the business.
Second, the firm’s specific implementation of the three-lines model affects what the SMF4 actually does. In firms where the second-line risk function holds significant operational risk responsibilities (some asset managers, some insurance firms), the SMF4 has a broader operational remit. In firms where the second line is more narrowly oversight-focused (most banks, most investment firms), the SMF4 role is more about framework, monitoring, and challenge.
SMF4 vs CRO vs Head of Risk vs SMF16 vs SMF5
Boards often use these titles loosely, and the confusion shows up in briefs, job adverts and responsibilities maps. The distinctions below are the ones that matter when you decide what you are actually hiring.
| Role | Line | Regulatory status | Main focus |
|---|---|---|---|
| SMF4 Chief Risk Officer | Second | Pre-approved Senior Manager (dual-regulated and Enhanced firms); stays pre-approved under Phase 2 proposals | Risk framework, appetite, stress testing, capital and liquidity risk, reporting to the Board and Risk Committee |
| CRO (non-SMF) | Second | No approval; may be a certified role today at an SM&CR firm | Same discipline at a Core firm, payments firm or unregulated business, without personal SMF accountability |
| Head of Risk / Deputy CRO | Second | Usually certified by the firm; Phase 2 proposes removing certification | Runs a risk discipline (credit, market, operational) or the day-to-day function beneath the CRO |
| SMF16 Compliance Oversight | Second | Pre-approved at all SM&CR categories; stays pre-approved | Compliance with FCA rules, conduct, Consumer Duty monitoring, regulatory relationship |
| SMF5 Head of Internal Audit | Third | Pre-approved today; proposed to become notified | Independent assurance over the first and second lines, reporting to the Audit Committee |
The practical reading of this table is simple. If your firm is Core, the urgent regulated hire is usually not a CRO at all but the SMF16 and SMF17 roles, and many smaller firms fill those on a fractional or interim basis — see our guide to SMF16 vs SMF17. If your firm is Enhanced or dual-regulated, the CRO is a pre-approved Senior Manager and the search has to be run as one. For the third-line counterpart, our SMF5 Head of Internal Audit hiring guide explains how that appointment differs, and our Director of Risk and Compliance job description covers the combined role that smaller firms often use instead.
Hiring an SMF4 Chief Risk Officer?
Exec Capital runs permanent, interim and fractional CRO searches with the SMF4 Statement of Responsibility, Form A preparation and approval timeline built into the plan from the first brief.
What an SMF4 CRO does that a corporate CRO does not
The substantive role of any senior risk leader includes setting the risk framework, owning the risk appetite, monitoring the firm’s risk profile, and presenting risk matters to the Board. SMF4 layers regulatory accountability over all of that and adds several specific dimensions that a corporate CRO would not typically encounter.
Personal accountability to the regulator. The CRO’s Statement of Responsibility sets out what the SMF4 holder is accountable for — typically the operation of the risk management framework, the firm’s risk-appetite-setting process, the second line’s relationship with the first line, and the ongoing identification of emerging risks — together with any prescribed responsibilities allocated to them. When something goes wrong in any of these areas, the regulator’s first analytical question is whether the SMF4 took reasonable steps in the area they are responsible for.
The relationship with the Risk Committee Chair (where applicable). In firms with a Risk Committee, the CRO works closely with the Risk Committee Chair (SMF10) — a relationship that is collaborative but structurally distinct. The CRO is the senior risk leader within the firm; the Risk Committee Chair is the senior independent voice testing risk matters at Board level. In PRA firms, the prescribed responsibility for safeguarding the independence of, and overseeing the performance of, the risk function is normally held by a non-executive, usually the Risk Committee Chair. The two roles complement each other; they should not duplicate each other. In smaller firms without a separate Risk Committee, the CRO’s main Board-level interface is typically a combined Audit and Risk Committee or the full Board.
The relationship with the regulators on risk matters. The CRO is often the firm’s principal point of contact with the PRA or FCA on risk-specific supervisory engagement — particularly during firm visits, thematic reviews, or any regulator-led work focused on prudential matters, operational resilience, or specific risk categories. SMF4 holders are increasingly expected to handle this engagement directly rather than through compliance or general management intermediaries.
Operational resilience accountability. The FCA’s operational resilience rules, and the PRA’s parallel SS1/21, took effect in March 2022, with the transitional period ending on 31 March 2025. They require firms to identify important business services, set impact tolerances, and show the firm can remain within those tolerances during severe but plausible disruption. While day-to-day operational resilience is often led by SMF24 (Chief Operations Function) where one exists, the CRO has a substantial role in the framework: assessing operational risk concentrations, evaluating third-party operational risk, and providing the second-line challenge to the firm’s operational resilience self-assessment.
Consumer Duty and conduct risk. The FCA’s Consumer Duty requires firms to deliver good outcomes for retail customers, evidenced by senior management and Board oversight. Conduct risk has become a much more substantial part of the CRO’s remit since the Duty came into force in July 2023 — particularly the integration of conduct risk into the broader risk framework, the second-line monitoring of customer outcomes, and the CRO’s role in challenging product design, pricing and customer communications where conduct risks are present.
Risk culture is on the SMF4’s plate. Regulators increasingly evaluate firms on the strength of their risk culture, not just on the technical adequacy of their risk frameworks. The CRO is typically expected to articulate how the firm’s risk culture works, where it is strong, where it is being strengthened, and how senior management are reinforcing it. Strong CRO candidates can do this from prior experience; first-time SMF4 candidates often need preparation on this dimension.
The CRO at banks, insurers, asset managers and fintechs
“Chief Risk Officer” covers very different jobs depending on the sector. A CRO who has thrived in one setting can struggle in another, and the regulator will test whether the experience transfers. The main differences:
Banks and building societies
At a bank the SMF4 is a PRA-designated Senior Manager and the role is weighted heavily towards prudential risk: credit risk, capital adequacy through the ICAAP, liquidity and funding through the ILAAP, interest rate risk in the banking book, and recovery planning. PRA prescribed responsibilities that are frequently allocated to the CRO include managing the firm’s internal stress tests and the accuracy of stress-testing information provided to the PRA, and in some firms the recovery plan, although allocations vary and some sit with the CFO. Candidates need to be comfortable with model risk, the PRA’s supervisory dialogue and the Board-level challenge expected under the PRA’s approach to Board responsibilities. Challenger banks add a build element: a first CRO at a newly authorised bank often has to create the risk function, the appetite framework and the reporting from scratch while the business is growing quickly.
Insurers
At a Solvency II insurer the CRO leads the risk management function required by the regime and owns the Own Risk and Solvency Assessment (ORSA) process. The role works closely with the Chief Actuary (SMF20) on reserving and capital, and with the Chief Underwriting Officer (SMF23) at firms where that function applies. Insurance CROs need fluency in insurance risk, reinsurance, catastrophe exposure and the internal model or standard formula, which is why banking CROs do not always transfer cleanly into insurance and vice versa. Our guide to SMF20 and SMF23 sets out how those functions fit together.
Asset and wealth managers
Most asset managers are solo-regulated, so an SMF4 only arises at Enhanced firms, which for asset managers is driven by assets under management. Below that level the CRO is usually a non-SMF appointment. The work centres on investment risk, liquidity risk in funds, operational and third-party risk, and the firm’s own prudential position under the Investment Firms Prudential Regime, where the ICARA process has replaced the ICAAP for FCA investment firms. Conduct risk and Consumer Duty matter more at retail-facing wealth managers than at institutional managers.
Fintechs, lenders and challengers
Fintechs vary most of all. A consumer credit lender becomes Enhanced only above the relevant revenue threshold, so many lenders hire a CRO without SMF4 status. Payment and e-money institutions sit outside SM&CR entirely, but still need credible risk leadership for safeguarding, financial crime and operational resilience. A fintech applying for a banking licence, by contrast, needs a CRO capable of standing up to PRA scrutiny before authorisation. In this segment, a fractional or interim risk leader is often the right first step, with a permanent SMF4 hire timed to the licence or the move into Enhanced status.
Building the SMF4 role specification
The role specification for an SMF4 search needs to do three things at once: communicate the substantive risk leadership role at this specific firm, communicate the regulatory dimension, and communicate the working environment the candidate will join. Specifications that handle the substantive role but skim the others systematically attract candidates who may withdraw at offer stage when they understand what the role actually entails.
The substantive dimension covers the standard CRO content tailored to the firm: the risk profile of the business (the dominant categories of risk — market, credit, operational, conduct, prudential), the maturity of the existing risk function (greenfield build, established function being refreshed, function inherited from a predecessor with specific reform priorities), the relationship with the executive team, and the specific strategic priorities where the CRO is expected to add value.
The regulatory dimension covers the SMF4 designation explicitly, the prescribed responsibilities allocated to the role, the firm’s classification under SM&CR (dual-regulated or Enhanced), the supervisory relationship, and the regulatory priorities the firm is currently working on (Consumer Duty outcomes monitoring, operational resilience self-assessment cycle, ICAAP, ILAAP, ICARA or ORSA cycle, any active regulatory matters on risk topics, any matters in the firm’s recent regulatory history that bear on risk).
The governance dimension covers the existing Risk Committee (where applicable) and the Risk Committee Chair, the relationship with the SMF1 CEO and SMF24 COO, the second-line organisational structure (size and composition of the risk team, reporting lines, sub-functional structure), and the responsibilities map. SMF4 candidates evaluating an offer will read all of this carefully — the strength of the second-line team and the working relationships with the Risk Committee Chair and CEO are first-order considerations for whether they can perform the role effectively.
Strong SMF4 specifications include a draft Statement of Responsibility — even in skeleton form. Candidates with prior SMF experience will read it and may propose amendments, particularly around the boundary between the SMF4’s accountability and the SMF1’s overall accountability for risk outcomes. This conversation is healthy and signals to the candidate that the firm has done its governance work. Our Chief Risk Officer job description is a useful starting template for the non-regulatory parts of the specification.
The FCA approval process for SMF4
Once the firm has selected its preferred candidate, the approval process begins. At an Enhanced solo-regulated firm the FCA decides the application; at a dual-regulated firm the PRA decides it with the FCA’s consent. The mechanics are similar to other SMF approvals — and we cover the detailed mechanics in the SMF1 CEO hiring guide — but several aspects of SMF4 approval are worth flagging specifically.
The submission is built around Form A, as set out on the FCA’s senior management function application page, supported by the candidate’s Statement of Responsibility, the firm’s Management Responsibilities Map and handover material, regulatory references covering the candidate’s previous six years of regulated employment, a criminal records check, a ten-year employment history and supporting evidence on competence, capacity and conflicts. The regulator must decide within three months of receiving a complete application, and the clock stops while it waits for further information. In practice, the FCA’s published data for April to June 2026 shows a median of 25 days to determine SM&CR approved person applications, against a new service standard of 95% within two months (see the timeline section below).
For SMF4 specifically, the regulator’s assessment focuses on three things beyond the standard fit-and-proper criteria.
Independence from the business. The regulator examines whether the candidate has the independence required to operate effectively as a second-line CRO. Where the candidate is moving from a first-line role at the same firm, or from a senior first-line role at a related firm, the regulator may probe how the independence will be established and maintained. Candidates with a track record in second-line risk roles clear this dimension cleanly; candidates moving across the line need a more deliberate explanation.
Technical competence in risk. The bar on technical competence is higher for SMF4 than for many other SMFs. The regulator expects candidates to demonstrate substantive knowledge of the relevant risk disciplines — market risk, credit risk, operational risk, conduct risk, prudential frameworks, depending on the firm’s profile. Candidates with formal risk qualifications (PRMIA, IRM, GARP designations) and substantial second-line experience clear this bar; candidates with general management experience but limited specific risk depth face a more rigorous assessment.
Understanding of the firm’s specific risk profile. The regulator is particularly interested in whether the candidate understands the specific risks of the firm they will be joining. Candidates who can articulate, with examples, the dominant risks in the firm’s business model and how they would approach managing them — including any specific regulatory matters in the firm’s history — clear this aspect of the assessment cleanly. At dual-regulated firms the PRA may also interview the candidate, and preparation for that interview should be built into the plan.
Form A timeline: how long SMF4 approval takes
The statutory deadline is the outer limit, not the plan. Most of the delay in SMF approvals happens before the form is submitted — incomplete regulatory references, a missing criminal records check, or a Statement of Responsibility that does not match the responsibilities map. A realistic SMF4 timeline looks like this:
| Stage | What happens | Indicative timing |
|---|---|---|
| Pre-submission | Offer accepted, SoR finalised, MRM updated, regulatory references requested, criminal records check obtained, competence evidence and any skills-gap plan prepared | Two to six weeks; references are now expected within four weeks of request |
| Regulatory review | Regulator reviews Form A, may ask questions and, for senior roles at dual-regulated firms, may interview the candidate | Statutory maximum three months from a complete application; FCA median 25 days in Q1 2026/27 |
| Notice period | Candidate works out notice at their current firm, which often runs alongside the regulatory review | Commonly three to six months for senior risk leaders |
| Start and handover | Approval granted, handover document reviewed, SoR effective from day one | On approval |
The FCA figures come from its authorisations operating service metrics: in April to June 2026 the median determination time for SM&CR approved person applications was 25 days (lower quartile 18, upper quartile 34), and 98.3% were decided within two months. Those figures cover all FCA SM&CR applications rather than SMF4 alone, and they do not cover PRA-led approvals at dual-regulated firms, where a more complex prudential role and a possible interview can extend the process. The practical lesson is that notice periods, not the regulator, usually set the start date — provided the application is complete on day one. Our guides to how long FCA SMF approval takes and to the Form A approval process go into the detail.
The fit-and-proper assessment for SMF4
The fit-and-proper assessment for SMF4 covers the same three criteria as for any senior management function: honesty, integrity and reputation; competence and capability; and financial soundness. The application of these criteria to the CRO role has some specific dimensions.
Honesty, integrity and reputation is examined with particular attention to the candidate’s track record on independent challenge and on willingness to escalate. The regulator looks for any pattern in previous roles that suggests the candidate has been accommodating of business pressure rather than independent of it, or that they have been associated with risk failures where independent challenge was clearly absent. Anything in the candidate’s record that requires explanation should be disclosed proactively — the regulatory references will surface it regardless, and proactive disclosure carries better than late discovery.
Competence and capability for SMF4 is assessed substantively. Prior SMF4 experience is the strongest evidence. Substantial second-line risk leadership experience in a regulated firm — head of risk, deputy CRO, or equivalent — is the next strongest. Candidates with prior senior risk experience at corporate firms (non-regulated FTSE companies, for example, or private companies with sophisticated risk functions) can clear competence and capability where the firm has put in place a credible induction and the candidate’s broader background equips them for the regulated dimension.
Financial soundness covers the candidate’s personal financial position. Same bar as for other SMF roles — anything significant must be disclosed, explainable, and not indicative of broader integrity concerns.
The fit-and-proper assessment is conducted both at appointment and on an ongoing basis. The firm itself has an obligation to satisfy itself at least annually that the SMF4 (and other Senior Managers) remain fit and proper, and to notify the regulator promptly of any matters that could affect the assessment. For CROs, this annual review is particularly important because risk roles can be exposed to specific incidents — a major loss event, a regulatory matter, a customer harm event — that may bear on fit-and-proper status if not handled appropriately.
The Statement of Responsibility for an SMF4 CRO
The Statement of Responsibility for the CRO sets out what the SMF4 holder is accountable for. For SMF4, the SoR will typically include:
- The operation of the firm’s risk management framework, including the framework’s design, deployment, and ongoing effectiveness
- The risk appetite framework — the formal articulation of what risk the firm will and will not take, and the metrics used to monitor it
- The second line of defence, including the structure, capability and independence of the risk function
- Stress testing and scenario analysis — the firm’s processes for testing its resilience to adverse but plausible scenarios
- The identification of emerging risks and the framework for bringing them to senior management and Board attention
- Operational risk and operational resilience, in coordination with SMF24 where applicable
- Conduct risk and Consumer Duty risk monitoring, in coordination with SMF16 (Compliance Oversight) where applicable
- The CRO’s relationship with the Board’s Risk Committee (where applicable) and the broader Board on risk matters
The exact allocation varies by firm and by classification. In firms with a separate Risk Committee, certain prescribed responsibilities sit with the SMF10 Risk Committee Chair rather than the SMF4 — typically those relating to the Board’s oversight of risk matters and the independence of the risk function. The SoR for the CRO must be consistent with how the firm’s overall responsibilities map allocates these. Note that the FCA’s Phase 2 proposals would delete most FCA prescribed responsibilities, so SoR wording at Enhanced firms is likely to be revisited once final rules are published.
Three drafting points are worth flagging for SMF4 SoRs.
The boundary with SMF1 needs to be clear. The CEO has overall accountability for the firm’s risk profile under their broader SMF1 responsibilities. The CRO has accountability for the operation of the risk function. The boundary between “overall accountability for risk outcomes” and “accountability for the risk function” needs to be drafted carefully so neither the SoR nor the responsibilities map creates duplication or gaps.
The boundary with SMF24 needs to be clear where SMF24 exists. Where the firm has both an SMF4 CRO and an SMF24 COO, the boundary on operational risk and operational resilience needs to be explicit. Typical pattern: the SMF24 has accountability for operational performance and the firm’s resilience capability; the SMF4 has accountability for the risk framework that monitors and challenges that capability. Both roles sit on the responsibilities map and the boundary is in the language of the SoRs.
The boundary with SMF16 needs to be clear where SMF16 exists. Compliance Oversight (SMF16) and CRO (SMF4) often work together on conduct risk and regulatory risk. Some firms combine the two functions under a single individual (a “head of risk and compliance”), which the regime permits but which requires careful SoR drafting to ensure both sets of responsibilities are clearly held. Where the two functions are separate, the boundary should be explicit.
Copy-ready SMF4 role profile and SoR wording
The box below is a starting draft for the role profile and the free-text part of the Statement of Responsibility. Adapt it to your firm’s classification, the prescribed responsibilities you actually allocate and your responsibilities map, and have it reviewed by your compliance lead or legal adviser before submission.
Role profile: Chief Risk Officer (SMF4)
Purpose. To lead the firm’s independent risk management function, ensuring the firm identifies, measures, monitors, manages and reports its risks within the risk appetite approved by the Board, and to provide independent challenge to the executive on all material risk matters.
Reporting lines. Reports to the Chief Executive Officer (SMF1) with an independent reporting line to the Chair of the Risk Committee (SMF10), and unrestricted access to the Chair of the Board and the Board.
Key accountabilities.
- Design, maintain and embed the enterprise risk management framework and associated policies.
- Propose the risk appetite statement and limits to the Board, monitor performance against them and escalate breaches.
- Lead the firm’s stress testing and scenario analysis and provide second-line challenge to the ICAAP, ILAAP, ICARA or ORSA (as applicable).
- Provide second-line oversight of operational risk, operational resilience and third-party risk, working with the Chief Operations Function (SMF24).
- Oversee conduct risk and Consumer Duty outcomes monitoring jointly with Compliance Oversight (SMF16).
- Report regularly to the Risk Committee and Board on the firm’s risk profile, emerging risks and risk culture.
- Lead, resource and develop the risk function, and act as a principal contact for the regulators on risk matters.
Statement of Responsibility: suggested free-text wording
“[Name] performs the Chief Risk function (SMF4) and is responsible for the overall management of the risk controls of [Firm], including the setting and managing of its risk exposures. [Name] is responsible for: (a) the design, implementation and effectiveness of the firm’s risk management framework; (b) recommending the firm’s risk appetite to the Board and monitoring and reporting the firm’s risk profile against it; (c) the firm’s internal stress testing and scenario analysis; (d) the leadership, resourcing and independence of the second-line risk function; and (e) reporting directly to the Board and the Risk Committee on the firm’s risk management arrangements. [Name] is not responsible for the first-line management of risk within the business areas, which remains with the relevant business heads, or for the oversight of compliance with FCA rules, which is the responsibility of the SMF16.”
Add any prescribed responsibilities allocated to the role, using the regulator’s exact wording, and check the text is consistent with the SoRs of the SMF1, SMF16, SMF24 and SMF10.
For more on drafting, see our guide to Statements of Responsibilities best practice.
Building the candidate pool for SMF4
The SMF4 candidate pool is structurally narrow, and several factors shape who is genuinely available.
Prior SMF4 approval is the strongest signal. Candidates currently holding or recently holding SMF4 in another regulated firm carry the highest credibility with the regulator and the lowest approval risk for the hiring firm. They have demonstrated they can clear the fit-and-proper assessment, they understand the substance of the role, and they bring direct regulatory engagement experience on risk matters. The challenge is that the population is small — the regulated CRO market in the UK is genuinely tight at the senior level — and the most credible candidates are typically not actively seeking moves.
Heads of risk and deputy CROs are the natural step-up pool. Candidates currently holding senior second-line risk roles below CRO level — head of risk, deputy CRO, head of credit risk, head of operational risk depending on firm type — are the most natural step-up pool for first-time SMF4 appointments. They have lived under the regime, are typically certified by their current firm rather than approved by the regulator, and understand the second line first-hand. Many SMF4 appointments come from this population. Because they have not held an SMF before, they will need the longer form of Form A and a clear competence narrative.
Strong SMF24 holders can transition. Where the SMF4 role has a heavy operational risk dimension — common in fintech, asset management technology platforms, or firms emphasising operational resilience — candidates currently holding SMF24 can be credible SMF4 successors. The transition is more substantial because the SMF24 role is functionally narrower than CRO, but it is well-trodden in firms where the boundary between operational risk and the broader risk framework is fluid.
Senior risk leaders from larger or differently-classified firms. A senior risk leader from a large dual-regulated firm moving to an Enhanced firm CRO role, or a senior risk leader from a banking environment moving into asset management, can bring useful breadth provided the underlying risk discipline transfers. The regulator’s assessment will probe the transfer carefully — risk skills do not always translate directly across firm types — but the pool exists and is sometimes overlooked.
Corporate CROs without prior SMF approval. Strong corporate CROs — from FTSE 100 or 250 companies, or from large private companies with sophisticated risk functions — can clear the SMF4 fit-and-proper assessment with the right preparation. The most common pattern is structured regulatory induction, sponsorship from existing SMF holders in the firm, and a deliberately staged Statement of Responsibility that allocates the most regulator-sensitive responsibilities (prudential matters where applicable, certain conduct risk dimensions) carefully during the first phase of the appointment. Corporate CROs from financial services-adjacent industries (insurance, financial technology, payments) typically transition more easily than those from completely unregulated sectors.
One specific note on candidate availability. The UK CRO market has been tight for several years following the post-2008 build-out of risk functions. Strong candidates often have multiple options at any given time, and searches that connect with candidates 18-24 months before they intend to move see substantively better outcomes than searches that begin only when the firm urgently needs to fill the role. Our guide on how to hire a CRO covers the search process step by step.
Interview questions for SMF4 candidates
Interviews for an SMF4 role should test the same things the regulator will test: independence, technical depth, judgement under pressure and understanding of your firm. The questions below are designed to produce evidence rather than rehearsed answers. Ask for specific examples and follow up on what the candidate personally did.
Independence and challenge
- Tell us about a time you opposed a commercial decision the CEO or Board wanted to make. What happened, and how was it recorded?
- How have you protected the independence of your function when your budget and headcount were set by the executive?
- When have you escalated directly to the Risk Committee Chair rather than through the CEO, and why?
Technical depth
- Walk us through how you would set and calibrate the risk appetite for a firm of our size and business model.
- How have you challenged an ICAAP, ILAAP, ICARA or ORSA that the first line or finance function produced? What changed as a result?
- Which stress scenarios would you run first here, and why those?
- How do you integrate conduct risk and Consumer Duty outcomes into an enterprise risk framework without duplicating compliance?
Accountability and reasonable steps
- How do you evidence that you have taken reasonable steps in your area of responsibility? Show us what your records look like.
- What would you want changed in our draft Statement of Responsibility before accepting, and why?
- Describe a risk event on your watch. What did you learn about the framework, and what did you change?
Firm-specific judgement
- Having read our public disclosures, what do you see as our three most material risks?
- How would you approach your first meeting with our PRA or FCA supervisor?
- What would you need from us in resources and access to do this job properly?
Compensation, indemnity and the personal accountability dimension
SMF4 compensation in UK regulated firms operates within constraints similar to other senior executive SMF roles. The constraints come from three sources: the regulatory rules on remuneration where applicable (particularly under the FCA and PRA Remuneration Codes for relevant firm types), the disclosure requirements applicable to listed regulated firms, and the practical reality that personal accountability under the regime affects what the role is reasonably worth.
Base salary, bonus and long-term incentive structures still apply. CRO compensation in regulated firms typically reflects a base salary in the range of a senior C-suite position at the firm, with bonus opportunity and long-term incentives shaped by the Remuneration Code overlay where applicable. Deferral periods, malus and clawback provisions, and performance metric alignment with risk and conduct outcomes are all standard elements of CRO packages at dual-regulated and larger Enhanced firms. The bonus cap was removed from 31 October 2023, and the FCA and PRA have since revised the Remuneration Codes (FCA PS25/15 and PRA PS21/25), so package design should be checked against the current rules rather than older precedent.
One specific compensation consideration for CROs: performance metrics that are appropriate for the role. CRO bonuses are not typically linked to revenue or commercial performance — the role is structurally independent of the business and linking compensation to commercial outcomes would compromise that independence. Strong CRO compensation structures use metrics like risk framework effectiveness, regulatory engagement quality, audit findings, second-line independence assessments, and stakeholder feedback. Boards designing CRO packages without thinking through this dimension sometimes inadvertently create perverse incentives that the regulator will probe during firm reviews.
Insurance and indemnity arrangements are an important part of the SMF4 offer. The CRO’s personal accountability under the regime means the candidate is exposed to potential regulatory action against them as an individual — including fines and prohibition from regulated employment — in addition to the standard director liabilities where the CRO is on the Board. Most regulated firms maintain D&O insurance and SMF-specific cover; the strength of this cover is a real consideration for SMF4 candidates and should be discussed during offer rather than after acceptance.
The reasonable steps test is the dimension that experienced candidates scrutinise most carefully. SMF4 candidates evaluate the firm’s risk and compliance environment, the strength of the existing second-line team, the responsibilities map, the working relationship with the Risk Committee Chair, and any matters in the firm’s recent regulatory history. They are evaluating whether the firm is one where they can take reasonable steps consistently and document their decisions appropriately. Firms that present well on this dimension attract better candidates.
Interim CRO cover and fractional risk support
CRO vacancies rarely arrive at a convenient time. A resignation with a three-month notice period, a sudden departure or a long-term absence can leave a dual-regulated or Enhanced firm without an approved SMF4. The regime provides a route for this.
The 12-week rule. Both regulators allow a firm to appoint someone to cover a temporary or reasonably unforeseen absence of a Senior Manager without prior approval, for up to 12 weeks in a consecutive 12-month period (FCA SUP 10C.3.13; PRA rules in the Senior Management Functions Part of the PRA Rulebook). Since the Phase 1 changes in April 2026, if the firm submits a valid application for the covering person (or a permanent successor) within that period, the cover can continue until the application is decided. The covering individual is subject to the Senior Manager Conduct Rules, and the firm should document the arrangement, the reasons and the handover.
Choosing interim cover. The options are an internal deputy CRO stepping up, a senior manager from elsewhere in the group, or an external interim CRO. An experienced interim who has held SMF4 before reduces risk considerably: they can start quickly, they understand the accountability, and they can be put forward for approval if the cover is going to run beyond 12 weeks. Our guide to urgent SMF appointments covers the sequence when time is short.
Fractional risk support at smaller firms. Core firms do not have an SMF4, but many still need senior risk input: building a risk register and appetite statement, preparing an ICARA, getting ready for Enhanced status, or supporting an application for a banking licence. A fractional risk leader working a set number of days a month is often the proportionate answer, typically alongside a fractional or permanent SMF16 Compliance Oversight and SMF17 MLRO, which are the regulated roles every Core firm must fill. Where a firm does need an SMF4, a part-time holder is possible in principle, but the regulator will look closely at time commitment and capacity on Form A, and a dual-regulated firm will rarely find a fractional SMF4 credible. Our fractional C-suite page explains how fractional senior appointments work in practice.
Common SMF4 search pitfalls
Several patterns recur in SMF4 searches that go off-track. Each is avoidable with deliberate planning at the start.
Underestimating the candidate pool tightness. Boards that begin SMF4 searches assuming a deep pool of available candidates often discover the reality more slowly than they expect. The fix is to start the search earlier than the comfortable timeline suggests and to engage candidates 18-24 months before they intend to move where possible.
Drafting the Statement of Responsibility around the chosen candidate. SoRs that have been retrofitted to fit a chosen candidate tend to be weaker than SoRs built first. The retrofit version often has gaps that the regulator will probe during approval, and creates the first-year governance issue that the boundary between the CRO and other senior managers is unclear. The fix is to draft the SoR as part of the role specification, before the candidate is selected.
Underspecifying the boundary with SMF1, SMF16 and SMF24. The CRO operates at the intersection of overall executive accountability (SMF1), compliance oversight (SMF16) and operational accountability (SMF24). Specifications and SoRs that do not address these boundaries explicitly create governance gaps and confusion in the first year of the appointment. The fix is to map the boundaries before the search and reflect them clearly in the SoR.
Underestimating the approval timeline. Boards that have not factored the approval window into their planning often end up with regulatory gaps, interim CRO arrangements, or compromises on the strongest candidate. The statutory deadline is three months from a complete application, and many FCA approvals are decided well inside that, but incomplete references or a PRA interview can extend it. The fix is to plan the search timeline backward from the desired start date with the approval window and the candidate’s notice period built in.
Treating compensation as a corporate CRO equivalent. Compensation structures designed without reference to the Remuneration Code (where applicable), the personal accountability dimension, or the specific performance metrics appropriate to a second-line role can attract the wrong candidates and create regulatory friction. The fix is to design the compensation structure with input from both the firm’s compensation advisers and from a search firm with regulated CRO experience.
Not engaging the Risk Committee Chair (where applicable) in the search. The CRO works closely with the Risk Committee Chair, and the dynamic between them shapes the effectiveness of the firm’s risk governance. Searches that present the Risk Committee Chair with a fait accompli on the CRO appointment start the relationship on the wrong footing. The fix is to involve the Risk Committee Chair throughout the search, while preserving the principle that the CRO is an executive appointment rather than a Board appointment. Our SMF10 Chair of the Risk Committee hiring guide covers the other side of that relationship.
The first 90 days for a new SMF4
The regulator judges a Senior Manager on the reasonable steps they take from the day their SoR becomes effective. A structured first 90 days protects the new CRO and gives the Board early evidence that the appointment is working.
Days 1 to 30: understand and take ownership. Review the predecessor’s handover document, the risk appetite statement, the latest ICAAP, ILAAP, ICARA or ORSA, recent Risk Committee packs, internal audit findings and any open regulatory correspondence. Meet the Risk Committee Chair, the Chair of the Board, the CEO, the CFO, the SMF16 and the Head of Internal Audit individually. Meet the supervisor early where the relationship allows. Record the issues inherited, so there is a clear line between what was found and what was done.
Days 31 to 60: test the framework. Assess whether the risk appetite metrics actually measure the firm’s material risks, whether limits are being monitored and breaches escalated, and whether the risk function has the people, data and independence it needs. Review the stress testing programme and the operational resilience self-assessment. Agree with the Risk Committee Chair what the committee should see more and less of.
Days 61 to 90: set the plan. Present a written assessment and a 12-month risk function plan to the Risk Committee, with priorities, resourcing requests and any changes to appetite or policy. Confirm that the SoR and responsibilities map reflect how responsibilities are really being exercised, and propose changes if not. This document becomes part of the CRO’s reasonable-steps record.
Boards can help by making the predecessor available for handover, giving the new CRO direct access to the Risk Committee from the first meeting, and agreeing in advance how the first-year objectives will be assessed. Our guide to board-level CRO governance and SMF4 approval covers the Board’s side of the relationship.
How Exec Capital approaches SMF4 mandates
Exec Capital runs SMF4 mandates as integrated executive-and-regulatory searches. The substantive risk leadership dimension — risk profile fit, second-line capability, leadership of the risk function, working relationships with the Risk Committee Chair and CEO — receives the same rigour we bring to any senior C-suite search. The regulatory dimension is built in from the brief, not added at the end. We work through the Statement of Responsibility outline with the firm, identify the candidate pool with prior SMF4 approval first and step-up candidates second, and structure the timeline around the realistic approval window.
Our regulated-firm practice covers the full set of senior appointments under SM&CR — SMF1 CEO, SMF3 Executive Director, SMF4 CRO, SMF24 Chief Operations Function, SMF9 Chair and SMF14 SID, alongside the senior C-suite, director-level and specialist roles that operate within regulated firms. Where the appointment falls within a sister firm’s specialism — finance and compliance functions including SMF2, SMF16 and SMF17 (FD Capital), or audit-qualified roles including SMF5 (Accountancy Capital) — we make the introduction directly and work alongside the relevant team. For wider non-executive appointments outside the SMF designation specifically, our specialist sister firm NED Capital covers the broader board landscape.
For boards beginning CRO succession or appointing an SMF4 for the first time, we offer a structured initial conversation that walks through the responsibilities map, the role specification and the realistic candidate pool before any formal mandate begins. For more on the broader SMF cluster, see the SMF Roles guide referenced above; for the corresponding executive role, our SMF1 CEO hiring guide sets out how CEO appointments fit alongside CRO succession. For a concise explainer of the function itself, see SMF4: the Chief Risk Officer function at a regulated firm, and for permanent, interim and fractional searches see our CRO recruitment service.
Frequently asked questions
What is SMF4?
SMF4 is the Chief Risk function under SM&CR. The holder has overall responsibility for managing the firm’s risk controls, including setting and managing its risk exposures and reporting to the Board on risk management arrangements. They must be approved by the regulator before taking up the role.
Does every FCA-regulated firm need an SMF4?
No. SMF4 applies to dual-regulated firms (banks, building societies, PRA-designated investment firms and most insurers) and to FCA Enhanced firms. Core and Limited Scope solo-regulated firms have no SMF4, and payment and e-money institutions are outside SM&CR altogether.
Will SMF4 still need pre-approval after the Phase 2 reforms?
On the current proposals, yes. FCA CP26/37 and PRA CP14/26 (October 2026) keep SMF4 as a pre-approved function while moving roles such as SMF5 and SMF10 to notification. The consultations close on 22 January 2027, so the position is not final until the policy statements are published.
How long does SMF4 approval take?
The statutory deadline is three months from a complete application. The FCA’s data for April to June 2026 shows a median of 25 days across SM&CR applications. PRA-led approvals for dual-regulated firms can take longer, particularly if the candidate is interviewed.
Can someone act as CRO before they are approved?
Only under the 12-week rule, which allows temporary cover for a temporary or reasonably unforeseen absence for up to 12 weeks in a 12-month period. If a valid application is submitted within that window, the cover can continue until it is decided. A new permanent CRO should not start performing the function before approval.
Who does the CRO report to?
Usually to the CEO for line management, with an independent reporting line to the Chair of the Risk Committee (SMF10) and direct access to the Board. That independent line is what allows the CRO to challenge the executive.
Can the CRO also be the head of compliance?
Yes, one person can hold SMF4 and SMF16 if the SoR makes both sets of responsibilities clear and the person has the capacity for both. Larger firms usually separate them so that each function gets full attention.
Can SMF4 be a fractional or part-time role?
It is possible in principle, but the regulator will test time commitment and capacity on Form A, and it is rarely credible at a bank or insurer. Fractional risk support is far more common at Core firms, which have no SMF4, and in the run-up to Enhanced status or a banking licence.
What qualifications should an SMF4 candidate have?
There is no mandatory qualification. Regulators look for substantial second-line risk experience relevant to the firm’s business model. Professional risk qualifications such as those from the IRM, PRMIA or GARP, an actuarial qualification for insurers, or an accounting qualification all help to evidence competence.
What is the difference between SMF4 and SMF10?
SMF4 is the executive who runs the risk function. SMF10 is the non-executive who chairs the Board Risk Committee and oversees the risk function’s independence and performance. SMF10 is proposed to become a notified role under Phase 2, while SMF4 stays pre-approved.
Further Reading and Authoritative Sources
For the FCA’s authoritative guidance on SM&CR, see the FCA’s SM&CR overview and the solo-regulated firms guidance linked above. The FCA’s Form A guidance (linked in the approval section) sets out the application requirements for SMF appointments.
For the broader regulatory framework, see the FCA’s operational resilience rules and the Consumer Duty, both linked above, which create substantial accountability for SMF4 holders. The PRA’s supervisory statement on strengthening individual accountability in banking covers the dual-regulated firm context.
For risk management frameworks and the three lines of defence model, the Institute of Internal Auditors publishes guidance that complements the regulatory requirements, particularly on the relationship between the second and third lines. The Institute of Risk Management publishes guidance on risk leadership, the CRO role, and risk culture that is widely used as a reference by senior risk professionals. The Institute of Directors publishes governance guidance that complements the regulatory framework on Risk Committee effectiveness and the CRO-Board relationship.
Appointing an SMF4 Chief Risk Officer?
Talk to us about permanent, interim or fractional CRO cover. We build the Statement of Responsibility, Form A preparation and approval timeline into the search from the first conversation.
Related Risk and Regulated-Firm Search Services
Exec Capital places Chief Risk Officers and the senior managers around them at regulated firms, on permanent, interim and fractional terms. Every search is run by our specialist team, with Adrian Lawrence FCA overseeing each mandate.
PRACTICE AREA
Chief Risk Officer Search
Permanent and interim CRO appointments, with SMF4 Form A support and approval planning built in.
PRACTICE AREA
Compliance and Risk Leadership
SMF16 and SMF17 appointments, including fractional and interim cover for smaller regulated firms.
→ Compliance and Risk Recruitment
→ Fractional Compliance Officer
PRACTICE AREA
Risk Committee and Board
Chairs, Risk Committee chairs and financial services NEDs who oversee the risk function at Board level.
PRACTICE AREA
Regulated Firm Executive Search
Senior appointments across banks, insurers, asset managers and other FCA and PRA-regulated firms.
→ Financial Services Executive Search
Every search is run by our specialist team, with Adrian Lawrence FCA overseeing each mandate.
About the author
Adrian Lawrence FCA is the founder of Exec Capital. He is a Chartered Accountant holding an ICAEW practising certificate in his own name, with more than 25 years’ experience operating at C-suite level. His background spans private equity-backed businesses, owner-managed companies and listed environments, giving Exec Capital a practitioner’s understanding of what senior leadership hires actually require. View Adrian’s ICAEW profile.